ADN2915ACPZ
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad, CSP |
| Number of Pins | 24 |
| Supplier Device Package | 24-LFCSP-WQ (4x4) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | Integrated Circuit (IC) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 486.5mW |
| Voltage - Supply | 1.14V~3.63V |
| Frequency | 176.8MHz |
| Base Part Number | ADN2915 |
| Output | CML |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.63V |
| Min Supply Voltage | 1.14V |
| Operating Supply Current | 377.4mA |
| Nominal Supply Current | 277.1mA |
| Power Dissipation | 420.4mW |
| Frequency (Max) | 6.5Mbps |
| Logic Function | Clock |
| Data Rate | 11.3 Gbps |
| Supply Type | Single |
| Input | CML |
| Ratio - Input:Output | 1:1 |
| -3db Bandwidth | 1.242MHz |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Main Purpose | SONET/SDH |
| Height | 950μm |
| Length | 4.1mm |
| Width | 4.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADN2915ACPZ Overview
The Tray package provides access to it. 24-WFQFN Exposed Pad, CSP is included in the case. Clock program is recommended to mount using type Surface Mount. In the device, there are 1. The maximum frequency for normaloperation is 6.5Mbps. The operating temperature is varied over a range of -40°C~85°C. There is 1.14V~3.63V voltage limitation on the component. It can supply a voltage of 1.14V~3.63V. There is only one purpose for this component, SONET/SDH. CML is intended to be the output. You need to start at ADN2915 to find information about a part. Clock program is recommended that Clock program be mounted wClock programh Surface Mount. 24 pins are provided on the device. Temperatures below -40°C cannot be used for this device. Temperatures below 85°C are recommended for operation. You should maintain a voltage of 3.3V for the supply. 1 outputs are possible on the device. In terms of supply voltage, this part is used under 3.63V. For the device to maintain a supply voltage above 1.14V. A 377.4mA supply current is typically required for this DAC. Using a frequency of 176.8MHz will allow it to reach excellent efficiency. Circuits application employs 24-LFCSP-WQ (4x4) as Circuits applications supplier device package.
ADN2915ACPZ Features
Mounting Type: Surface Mount
Include 1 Circuits
run the output at th range of CML
with 24 Pins
operate supply voltage at the range of 3.3V
ADN2915ACPZ Applications
There are a lot of Analog Devices Inc. ADN2915ACPZ application specific timer?applications.
- Servers, storage
- Test and Measurement
- MSAN/DSLAM/PON
- Printers, scanners, projectors
- Ethernet Switches, Routers
- Networking/communication
- Servers, Storage, Search Acceleration
- Print Imaging
- Switches/routers
- Small Cells, Mobile Backhaul/Fronthaul
