ADP1190ACBZ-R7
| Parameters | |
|---|---|
| Source Url Status Check Date | 2013-05-01 14:56:44.416 |
| Height | 330μm |
| Length | 1.64mm |
| Width | 1.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFBGA, WLCSP |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Load Discharge |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 170mOhm |
| HTS Code | 8542.39.00.01 |
| Base Part Number | ADP1190 |
| Pin Count | 12 |
| Number of Outputs | 5 (4 Signal) |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 3.6V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Operating Supply Current | 700nA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 1.4V |
| Max Input Voltage | 3.6V |
| Nominal Input Voltage | 3.6V |
| Turn-Off Delay Time | 4 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.4V~3.6V |
| Rds On (Typ) | 65m Ω |
ADP1190ACBZ-R7 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 12-UFBGA, WLCSP package includes it.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The LED driver is equipped with 5 (4 Signal) outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts has been specified.This LED driving board is equipped with Load Discharge features in order for it to be useful.The ADP1190 family consists of this type.The 12 pins are used for the operation of the system.This results in the maximum output current dropping to 1A to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.There are 12 pins in total on this board.The LED driver has 170mOhm resistance.In this case, the output current will be set to 500mA.In this case, the analog IC in this gadget is SPST.A supply voltage of 3.6V is recommended for maximum efficiency.This LED driving board can accept voltages up to 3.6V volts as an input.There is a minimum input voltage of 1.4V volts.There is a maximum current requirement of 1A for its operation.
ADP1190ACBZ-R7 Features
Resistance of 170mOhm
ADP1190ACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADP1190ACBZ-R7 Power Switches ICs applications.
- Set-top-box
- Notebook and Tablet Computers
- Hot Swap
- Hot Swap
- USB Protection
- Telecom and Network Systems
- Wireless/Networking Cards
- USB Power Distribution
- Notebook PC
- Smart Phones, Feature Phones
