ADP1196ACBZ-R7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, WLCSP |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 10mOhm |
| Subcategory | Peripheral Drivers |
| Technology | DMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADP1196 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 3A |
| Output Configuration | High Side or Low Side |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ms |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.83V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 10m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Width | 0.95mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1196ACBZ-R7 Overview
It is packaged in the manner of a Tape & Reel (TR).In the 6-WFBGA, WLCSP package, it is included.This lighting drivere has a mounting type of Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable operation, set the temperature to -40°C~105°C TJ.There is a default setting of 1 for output.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.As far as features are concerned, the LED driving board has Slew Rate Controlled.I believe it belongs to the ADP1196 family.In total, there are 6 terminations.The 6 pins are used to operate the LED driver.It consists of 1 functions.The supply voltage can be 1.8V for high efficiency.The LED driving board is mounted in the way of Surface Mount.10mOhm resistance is present in the lighting driver.It is set to 4A in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.
ADP1196ACBZ-R7 Features
Supplied from 1.8V
Resistance of 10mOhm
ADP1196ACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADP1196ACBZ-R7 Power Switches ICs applications.
- Portable/Handheld Devices
- HDD and SSD
- USB Power Distribution
- Wireless Modem Data Cards
- Wireless Headsets
- Smartphone and PDA
- Handheld Devices
- Low Voltage I/O System Power
- Hot Swaps
- USB Power Distribution
