ADP1650ACBZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFBGA, WLCSP |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.5MHz 3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1650 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5V |
| Min Supply Voltage | 2.7V |
| Output Current | 1.5A |
| Voltage - Output | 4.575V~5.425V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5V |
| Output Current per Channel | 1.5A |
| Current - Output / Channel | 1.5A Flash |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | I2C |
| Number of Segments | 1 |
| Switching Frequency | 3MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.66mm |
| Length | 2mm |
| Width | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1650ACBZ-R7 Overview
To save board space, it uses the 12-WFBGA, WLCSP package. This LED driver has 1 outputs.This mounting method is Surface Mount.With high efficiency, it appears as a DC DC Regulator.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.There are considerable benefits for Camera Flash.The frequency of 1.5MHz 3MHz is used as the basis for its operation.In this case, the termination value is 12.It is configured with 12 pins as its base.It consists of 1 segments.The device has been mounted on the Surface Mount.It is under the base part number ADP1650 that the LED driver can be found.5V is an acceptable voltage.Its output voltage is 4.575V~5.425V.There are 12 pins on this device.Furthermore, it can be classified as Display Drivers based on its characteristics.A minimal input voltage of 2.7V is required for it to operate.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 2.7V.The maximum supply current is reached when 5V is reached.It is possible to supply the load with 1.5A current.It is necessary to have 3.3V voltages inside systems to power them.As long as the switching frequency is maintained at 3MHz, this electronic component is able to perform all of its functions properly.Even when operating at a maximal output current of 1.5A, it is capable of delivering all the benefits of a LED driver.
ADP1650ACBZ-R7 Features
Available in the 12-WFBGA, WLCSP package
Operating temperature of -40°C~85°C TA
Frequency of 1.5MHz 3MHz
Supply voltage of 3.6V
Operating with the supply voltage of 3.3V
Switching frequency of 3MHz
ADP1650ACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADP1650ACBZ-R7 LED Driver ICs applications.
- LED Lightings for Inspection Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Replacement lamps
- LED Lighting PFCs, Linear Dimmable
- Down lights
- Panel lighting
- Architectural lighting
- Flicker-free LED Lighting using R1580N
- LED headlights
- Dimmable LED for vehicle interiors
