ADP1653ACPZ-R7
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADP1653 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 92 % |
| Max Output Current | 500mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1W |
| Output Current | 500mA |
| Max Supply Current | 3mA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.75V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 500mA |
| Current - Output / Channel | 500mA Flash |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 2 |
| Switching Frequency | 1.2MHz |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1653ACPZ-R7 Overview
To save board space, it uses the 16-VFQFN Exposed Pad, CSP package. In LED drivers, the outputs are all set to 1.Surface Mount is used for mounting.In this case, it emerges as a DC DC Regulator with a high efficiency.When the temperature is -40°C~125°C TA, it can work normally.Taking advantage of Camera Flash has considerable benefits.The operation of this system is supported by 16 terminations.With 16 pins at the base, this LED driver has a base configuration.Based on our estimates, there are 2 segments.The mount is in the way of Surface Mount.Under the base part number ADP1653, you will find this LED driver.The supply voltage of 5.5V is an acceptable maximum value.16 pins are available on the device.Depending on its characteristics, it is classified into Display Drivers.This device operates with a minimum input voltage of 2.75V volts.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 3V.It reaches 5.5V when the maximum supply current is allowed.Whenever the supply current is lower than 3mA, it can provide high efficiency.You can supply 500mA current to the load.This electronic component can fully perform its functions when the switching frequency is kept at 1.2MHz.LED drivers deliver all their benefits with a maximum output current of 500mA.
ADP1653ACPZ-R7 Features
Available in the 16-VFQFN Exposed Pad, CSP package
Operating temperature of -40°C~125°C TA
Switching frequency of 1.2MHz
ADP1653ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADP1653ACPZ-R7 LED Driver ICs applications.
- LED headlights
- Constant Voltage Power Source for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Street lighting
- LED Lightings for Inspection Devices
- Medical surgery lighting
- Scanners and Handy Terminals
- High-end retail lighting
- Panel lighting
- Other Electronic Devices
