ADP1823ACPZ-R7

3.7V~20V 32-Pin ADP1823 DC to DC converter IC2 Outputs 300kHz 600kHz Transistor Driver

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADP1823ACPZ-R7
Package: 32-WFQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 618
Description: 3.7V~20V 32-Pin ADP1823 DC to DC converter IC2 Outputs 300kHz 600kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	32-WFQFN Exposed Pad, CSP
Number of Pins	32
Supplier Device Package	32-LFCSP-WQ (5x5)
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Frequency	1MHz
Base Part Number	ADP1823
Function	Step-Down
Number of Outputs	2
Output Voltage	17V
Output Type	Transistor Driver
Max Output Current	20A
Operating Supply Voltage	20V
Operating Supply Current	10μA
Nominal Supply Current	3mA
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	3.7V~20V
Quiescent Current	1mA
Control Features	Enable, Frequency Control, Power Good, Soft Start, Tracking
Max Output Voltage	15.3V
Topology	Buck
Min Input Voltage	3.7V
Frequency - Switching	300kHz 600kHz
Max Input Voltage	18V
Synchronous Rectifier	Yes
Min Output Voltage	600mV
Max Duty Cycle	90 %
Duty Cycle (Max)	90%
Clock Sync	Yes
Output Phases	2
Number of Output Phases	2
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADP1823ACPZ-R7 Overview

Capsuled in the 32-WFQFN Exposed Pad, CSP package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 2. There is a Tape & Reel (TR) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). DC control operates at 3.7V~20V volts and has 3.7V~20V supply voltage. Work well in dc switchers with a -40°C~85°C TA. In this switching controller, the switch can be set to 300kHz 600kHz. dc dc regulators can be carried out with Surface Mount. Enable, Frequency Control, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. You can find other relevant dc to dc converter ics by searching "ADP1823". There are only 32 pins on switching converter. According to the test statistics, DC regulator outputs 17V voltage. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 90 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. A frequency of 1MHz is used by the switching controller. To operate the voltage regulator dc to dc safely and reliably, users should apply 20V. Keep dc regulator at a temperature of -40°C or above. The temperature should not exceed 85°C degrees Celsius. A dc switching in a dormant state uses 1mA. In order to ensure the dc switcher's functionality, users must limit the voltage to 18V due to the dc switcher's maximum input voltage. A 32-LFCSP-WQ (5x5) would be the supplier dc dc controller package for this part. Voltage 3.7V is needed for the supply. Output current will not exceed 20A. Its datasheet indicates the switching converter can output a maximum of 15.3V volts. It runs on a 10μA supply current. The voltage controller's lowest voltage output is not less than 600mV. Phases of this controller are 2. The nominal current supply of this the controllers dc is 3mA.

ADP1823ACPZ-R7 Features

Transistor Driver Outputs
Switching Frequency: 300kHz 600kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
Max Duty Cycle: 90 %
Frequency: 1MHz