ADP1870ARMZ-0.6-R7

10 Terminals 2.95V~20V 10-Pin ADP1870 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADP1870ARMZ-0.6-R7
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 907
Description: 10 Terminals 2.95V~20V 10-Pin ADP1870 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver (Kg)

Details

Tags

Parameters
Operating Supply Current	140μA
Nominal Supply Current	1.1mA
Output Configuration	Positive
Output Current	25A
Voltage - Supply (Vcc/Vdd)	2.95V~20V
Control Features	Enable
Max Output Voltage	18V
Topology	Buck
Min Input Voltage	2.95V
Control Mode	CURRENT-MODE
Frequency - Switching	600kHz
Max Input Voltage	20V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	600mV
Switcher Configuration	PUSH-PULL
Max Duty Cycle	65 %
Clock Sync	No
Length	3mm
Width	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Additional Feature	MINIMUM OUTPUT VOLTAGE: 0.6V
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADP1870
Function	Step-Down
Number of Outputs	1
Output Voltage	600mV
Output Type	Transistor Driver
Operating Supply Voltage	20V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER

ADP1870ARMZ-0.6-R7 Overview

This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. For 1 outputs, the dc motor controller is appropriate. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at 2.95V~20V volts and has 2.95V~20V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 600kHz. dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable. The switch converters are connected to a SWITCHING CONTROLLER analog IC. DUAL are the position of the terminal of the switching converters. There are many different types of terminations for 10. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "ADP1870". 10 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. DC regulator outputs 600mV voltage according to the test statistics. You should note down the dc dc regulator's usual output current of 25A when you start a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 65 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sIn order to satisfy the need, DC to DC voltage regulator has a value of MINIMUM OUTPUT VOLTAGE: 0.6V. It is suggested that users apply 20V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. In order to limit the voltage of a dc switcher whose maximum input voltage is 20V, it must be limited by the user. A voltage of 2.95V is required for the supply. Its datasheet indicates the switching converter can output a maximum of 18V volts. 140μA volts is the supply current. There is 600mV voltage output lower than 600mV on the voltage controller. nominal current supply for this the controllers dc is 1.1mA.