ADP1871ACPZ-0.3-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad, CSP |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Additional Feature | MINIMUM OUTPUT VOLTAGE: 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1871 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 140μA |
| Nominal Supply Current | 1.1mA |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 2.95V~20V |
| Control Features | Enable |
| Max Output Voltage | 18V |
| Topology | Buck |
| Min Input Voltage | 2.95V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 84 % |
| Clock Sync | No |
| Height Seated (Max) | 0.85mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1871ACPZ-0.3-R7 Overview
In the 10-VFDFN Exposed Pad, CSP package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 2.95V~20V. Qualified to work in a -40°C~125°C TJ dc switcher. This switching controller can switch at 300kHz. dc dc regulator can be generalized using Surface Mount. Featured in the dcdc regulator is Enable which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 10 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. In addition to "ADP1871", there are other relevant dc to dc converter ics you can find. 10 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 600mV voltage. In most cases, the dc dc regulator's output current is 25A. This information should be noted when you begin working with the component. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 84 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. In order to satisfy the need, DC to DC voltage regulator has a value of MINIMUM OUTPUT VOLTAGE: 0.6V. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 20V. The maximum input voltage of the dc switcher is 20V, so users need to limit the voltage accordingly. A voltage of 2.95V is required for the supply. There will be 25A output current greater than 25A from the dc switcher. The datasheet indicates that the switching converter can output 18V volts at its maximum. There is 140μA supply current for it. There is 600mV voltage output lower than 600mV on the voltage controller. There is a nominal current supply of 1.1mA for this the controllers dc.
ADP1871ACPZ-0.3-R7 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
MINIMUM OUTPUT VOLTAGE: 0.6V
ADP1871ACPZ-0.3-R7 Applications
There are a lot of Analog Devices Inc. ADP1871ACPZ-0.3-R7 DC to DC converter applications.
- Combined machine tools
- Machining centers
- Elevator lighting
- Printing equipment
- Grinders
- Shearing machines
- Fire elevators
- Computed tomography (CT)
- Magnetohydrodynamic power
- PSRR circuits
