ADP1871ACPZ-1.0-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad, CSP |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Additional Feature | MINIMUM OUTPUT VOLTAGE: 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1871 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 140μA |
| Nominal Supply Current | 1.1mA |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3.25V~20V |
| Control Features | Enable |
| Max Output Voltage | 18V |
| Topology | Buck |
| Min Input Voltage | 2.95V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 45 % |
| Clock Sync | No |
| Height Seated (Max) | 0.85mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1871ACPZ-1.0-R7 Overview
This switching controller fits most application requirements since it is packaged in a 10-VFDFN Exposed Pad, CSP package. This dc motor controller can be used to generate outputs with 1 numbers. A solid enclosure of Tape & Reel (TR) surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). 3.25V~20V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with -40°C~125°C TJ. Using this switching controller, it is possible to switch at 1MHz. The Surface Mount value makes it suitable for general dc dc regulator. Enable is used for efficient switching control in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 10. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. In addition to "ADP1871", there are other relevant dc to dc converter ics you can find. There are 10 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 600mV voltage. You should note that the dc dc regulator's usual output current is 25A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 45 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Hence, MINIMUM OUTPUT VOLTAGE: 0.6V is used to better suit the DC to DC voltage regulator's situation. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 20V. In order to ensure the dc switcher's functionality, users must limit the voltage to 20V due to the dc switcher's maximum input voltage. Voltage 2.95V must be supplied. There will be 25A output current greater than 25A from the dc switcher. Datasheets state the switching converter can output up to 18V volts. A supply current of 140μA is used to power it. A voltage controller's lowest output voltage cannot be less than 600mV. Switching voltage regulators' nominal current supply is 1.1mA.
ADP1871ACPZ-1.0-R7 Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
MINIMUM OUTPUT VOLTAGE: 0.6V
ADP1871ACPZ-1.0-R7 Applications
There are a lot of Analog Devices Inc. ADP1871ACPZ-1.0-R7 DC to DC converter applications.
- Terrestrial set-top boxes
- Hydraulic presses
- Scientific research
- Automatic plug-in machines
- Computed tomography (CT)
- Medical equipment
- Cutting machine tools
- Nuclear power plants
- Hydro power
- Current source circuits
