ADP1871ARMZ-0.3-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Additional Feature | MINIMUM OUTPUT VOLTAGE: 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1871 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 140μA |
| Nominal Supply Current | 1.1mA |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 2.95V~20V |
| Control Features | Enable |
| Max Output Voltage | 18V |
| Topology | Buck |
| Min Input Voltage | 2.95V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 84 % |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1871ARMZ-0.3-R7 Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. 2.95V~20V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. The switching controller is capable of switching at the 300kHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 10 terminations with various dc switching's functions. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. A search for "ADP1871" will reveal other relevant dc to dc converter ics. Pins number 10 of switching converter in total. The type is a particular Switching Regulator or Controllers of switching converter. Based on the test statistics, DC regulator outputs voltage 600mV. If you start a project, note down the dc dc regulator's usual output current of 25A. A duty cycle set at 84 % ensures voltage regulator dc to dc reliability during power-on and power-off. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. The value of DC to DC voltage regulator is set to MINIMUM OUTPUT VOLTAGE: 0.6V in order to better satisfy the requirement. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 20V. The maximum input voltage of this dc switcher is 20V, so users must limit the voltage accordingly. 2.95V is the required supply voltage. A dc switcher can only produce an output current of 25A. As per its datasheet, the switching converter has a maximum output of 18V volts. The supply current is 140μA. Lowest voltage output of the voltage controller must be greater than 600mV. There is a nominal current supply of 1.1mA for this the controllers dc.
ADP1871ARMZ-0.3-R7 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
MINIMUM OUTPUT VOLTAGE: 0.6V
ADP1871ARMZ-0.3-R7 Applications
There are a lot of Analog Devices Inc. ADP1871ARMZ-0.3-R7 DC to DC converter applications.
- Computer application technology
- Industrial robots
- Series voltage regulation circuits
- Computer rooms
- Printing
- Motor controller circuits
- Digital precision reference circuits
- Low output voltage switching power supply circuits
- Adjustable voltage or current linear circuits
- Serial communication converter
