ADP1871ARMZ-0.6-R7
| Parameters | |
|---|---|
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 20V |
| Operating Supply Current | 140μA |
| Nominal Supply Current | 1.1mA |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 2.95V~20V |
| Control Features | Enable |
| Max Output Voltage | 18V |
| Topology | Buck |
| Min Input Voltage | 2.95V |
| Frequency - Switching | 600kHz |
| Max Input Voltage | 20V |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Max Duty Cycle | 65 % |
| Duty Cycle (Max) | 65% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | ADP1871 |
| Function | Step-Down |
ADP1871ARMZ-0.6-R7 Overview
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. 1 outputs are supported by the dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). 2.95V~20V is the supply voltage and the operating voltage of the dc control. Worked in a -40°C~125°C TJ dc switcher before. The switching controller is capable of switching at the 600kHz position. The Surface Mount value makes it suitable for general dc dc regulator. The dcdc regulator features Enable for efficient switching control. ADP1871 can be searched for other relevant dc to dc converter ics. There are only 10 pins on switching converter. DC regulator outputs 600mV voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 25A, so you should note it down when starting a new project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 65 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 20V. At least -40°C°C is recommended. Running the machine at 125°C is ideal. The dc switcher's maximum input voltage is 20V, so users must limit the voltage accordingly. There is 10-MSOP dc dc controller package associated with this part. Voltage 2.95V is needed for the supply. There will be 25A output current greater than 25A from the dc switcher. The switching converter can output 18V volts at its utmost, according to the datasheet. The supply current of the voltage controller is 140μA. At its lowest voltage, the voltage controller does not produce less than 600mV. During switching, this controller has a phase of 1. Switching voltage regulators' nominal current supply is 1.1mA.
ADP1871ARMZ-0.6-R7 Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable
Max Duty Cycle: 65 %
ADP1871ARMZ-0.6-R7 Applications
There are a lot of Analog Devices Inc. ADP1871ARMZ-0.6-R7 DC to DC converter applications.
- Printing
- Automation technology
- Various precision measuring detectors
- Product burn-in
- Game consoles
- Fire elevators
- Communication system
- Sink circuits
- Product testing
- Hydro power
