ADP1872ARMZ-1.0-R7
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Additional Feature | MINIMUM OUTPUT VOLTAGE 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1872 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 140μA |
| Nominal Supply Current | 70mA |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3V~20V |
| Control Features | Enable |
| Max Output Voltage | 4.67V |
| Topology | Buck |
| Min Input Voltage | 2.75V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 5.5V |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 45 % |
| Duty Cycle (Max) | 45% |
| Clock Sync | No |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1872ARMZ-1.0-R7 Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. It is sufficient to generate 1 outputs with this dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 3V~20V. Work well in dc switchers with a -40°C~125°C TJ. A generalization of dc dc regulator can be made using Surface Mount. DCDC regulator is controlled efficiently by Enable. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 10 terminations with various dc switching's functions. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. In addition to "ADP1872", there are other relevant dc to dc converter ics you can find. There are 10 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. DC regulator outputs 600mV voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 25A. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 45 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controllers work at 1MHz Hz. In order to satisfy the need, DC to DC voltage regulator has a value of MINIMUM OUTPUT VOLTAGE 0.6V. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 5.5V. It is possible to set the input voltage as 5.5V for nominal working statuses. Since the dc switcher's maximum input voltage is 5.5V, the voltage must be regulated accordingly. A voltage of 2.75V is required for the supply. DC switcher will not be able to provide an output current above 25A volts. As per its datasheet, the switching converter has a maximum output of 4.67V volts. 140μA volts is the supply current. Lowest voltage output of the voltage controller must be greater than 600mV. There is a nominal current supply of 70mA for this the controllers dc.
ADP1872ARMZ-1.0-R7 Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 1MHz
MINIMUM OUTPUT VOLTAGE 0.6V
ADP1872ARMZ-1.0-R7 Applications
There are a lot of Analog Devices Inc. ADP1872ARMZ-1.0-R7 DC to DC converter applications.
- Computer application technology
- Planers
- Linear guide
- PSRR circuits
- Servo drive system
- Boring machines
- Various precision measuring instruments
- Communication system
- Scientific research
- Computer monitoring equipment of building
