ADP1874ARQZ-1.0-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.64mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1874 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.1μA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.25V~20V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Max Output Voltage | 18V |
| Topology | Buck |
| Min Input Voltage | 2.95V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 45 % |
| Clock Sync | No |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1874ARQZ-1.0-R7 Overview
Capsuled in the 16-SSOP (0.154, 3.90mm Width) package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. A total of Transistor Driver dc switching's outputs can be handled by it. 3.25V~20V is the operating voltage and supply voltage of the dc control. Qualified to work in an dc switcher with -40°C~125°C TJ. In this switching controller, the switch can be set to 1MHz. The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Power Good, Soft Start, Tracking. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . The 16 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. ADP1874 can be used to locate other relevant dc to dc converter ics. There are only 16 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. According to the test statistics, DC regulator outputs 600mV voltage. A duty cycle set at 45 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. This value is ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V so that DC to DC voltage regulator better serves the purpose. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 20V. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 20V. In order to use a 2.95V voltage supply, switching controller is necessary to have one. In this case, the dc switcher won't produce more than 25A watts of output current. At its maximum, the switching converter can output 18V volts. 1.1μA volts is the supply current. Neither the voltage controller's lowest voltage output 600mVr its highest voltage output is less than 600mV.
ADP1874ARQZ-1.0-R7 Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V
ADP1874ARQZ-1.0-R7 Applications
There are a lot of Analog Devices Inc. ADP1874ARQZ-1.0-R7 DC to DC converter applications.
- Various CNC machine tools
- Balance equipment
- Cutting machine tools
- Sensitive electronic devices
- Smoke prevention equipment
- Die casting equipment
- Nuclear power plants
- USB circuits
- Domestic water pumps
- Special machining machine tools
