ADP1875ARQZ-0.3-R7
| Parameters | |
|---|---|
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.1μA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.95V~20V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Max Output Voltage | 18V |
| Topology | Buck |
| Min Input Voltage | 2.95V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 84 % |
| Clock Sync | No |
| Length | 4.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Additional Feature | ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.64mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1875 |
ADP1875ARQZ-0.3-R7 Overview
It comes in the 16-SSOP (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 1 outputs. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 2.95V~20V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 300kHz. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Power Good, Soft Start, Tracking. An analog IC SWITCHING CONTROLLER is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 16 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. In addition to "ADP1875", there are other relevant dc to dc converter ics you can find. 16 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. Statistically, the DC regulator outputs 600mV voltage. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 84 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. In order to satisfy the need, DC to DC voltage regulator has a value of ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V. The maximum input voltage of the dc switcher is 20V, so users need to limit the voltage accordingly. In order to use a 2.95V voltage supply, switching controller is necessary to have one. Input current cannot exceed 25A with this dc switcher. Datasheets indicate that the switching converter can output 18V volts at its maximum. It runs on a supply current of 1.1μA. The voltage controller's lowest voltage output is not less than 600mV.
ADP1875ARQZ-0.3-R7 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V
ADP1875ARQZ-0.3-R7 Applications
There are a lot of Analog Devices Inc. ADP1875ARQZ-0.3-R7 DC to DC converter applications.
- Smoke prevention equipment
- Industrial robots
- Bending machines
- Drilling machines
- Product burn-in
- Scientific testing
- Geothermal power
- Energy management systems
- Textile machinery
- Automatic testing equipment
