ADP1878ACPZ-0.3-R7
| Parameters | |
|---|---|
| Lifecycle Status | LAST TIME BUY (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad, CSP |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1878 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 30A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.1μA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.95V~20V |
| Control Features | Enable, Power Good, Soft Start |
| Max Output Voltage | 18V |
| Topology | Buck |
| Min Input Voltage | 2.95V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 84 % |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1878ACPZ-0.3-R7 Overview
With its 14-WFDFN Exposed Pad, CSP package, the switching controller fits the needs of most applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 2.95V~20V. Work well in dc switchers with a -40°C~125°C TJ. This switching controller can switch at 300kHz. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable, Power Good, Soft Start which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . An array of 14 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Searching "ADP1878" will return other relevant dc to dc converter ics. In total, switching converter has 14 pins. There is a particular type of Switching Regulator or Controllers in switching converter. The test statistics indicate that DC regulator outputs a voltage of 600mV. The maximum duty cycle of this voltage regulator dc to dc is set to 84 % to ensure reliability during power-up and power-down. This Surface Mount makes DC switcher suitable for most prototypes and applications. As a result, DC to DC voltage regulator has a value of ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V so that the need can be met more directly. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 20V. A voltage of 2.95V must be present in the supply. There will be 30A output current greater than 30A from the dc switcher. Datasheets state the switching converter can output up to 18V volts. There is a 1.1μA volt supply current. Neither the voltage controller's lowest voltage output 600mVr its highest voltage output is less than 600mV.
ADP1878ACPZ-0.3-R7 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V
ADP1878ACPZ-0.3-R7 Applications
There are a lot of Analog Devices Inc. ADP1878ACPZ-0.3-R7 DC to DC converter applications.
- Grinders
- Series voltage regulation circuits
- Analog precision reference circuits
- Milling machines
- Electric heating, lighting
- Computer-related products
- Large fire protection systems
- Access control systems
- Remotely powered electric motors
- Wide-range voltage regulation circuits
