ADP1878ACPZ-1.0-R7
| Parameters | |
|---|---|
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 30A |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.1μA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.25V~20V |
| Control Features | Enable, Power Good, Soft Start |
| Max Output Voltage | 18V |
| Topology | Buck |
| Min Input Voltage | 2.95V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 45 % |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | LAST TIME BUY (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad, CSP |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1878 |
| Function | Step-Down |
ADP1878ACPZ-1.0-R7 Overview
Capsuled in the 14-WFDFN Exposed Pad, CSP package, the switching controller suits most application needs. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tape & Reel (TR) surrounds pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 3.25V~20V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a -40°C~125°C TJ dc switcher. A switching controller such as this can switch at a value of 1MHz . The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Enable, Power Good, Soft Start which allows efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the DUAL position. Various 14 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics can be found by searching "ADP1878". 14 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 600mV. voltage regulator dc to dcs with a 45 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is a maximum frequency of 1MHz on this dc regulators. As a result, DC to DC voltage regulator has a value of ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V so that the need can be met more directly. A circuit should contain 20V in order to ensure the voltage regulator dc to dc runs safely and reliably. In order to limit the voltage of a dc switcher whose maximum input voltage is 20V, it must be limited by the user. In order to use a 2.95V voltage supply, switching controller is necessary to have one. Output current will not exceed 30A. At its maximum output, the switching converter can provide 18V volts. There is a 1.1μA volt supply current. At its lowest voltage, the voltage controller does not produce less than 600mV.
ADP1878ACPZ-1.0-R7 Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V
ADP1878ACPZ-1.0-R7 Applications
There are a lot of Analog Devices Inc. ADP1878ACPZ-1.0-R7 DC to DC converter applications.
- Product testing
- Scientific research
- Smart grid
- USB circuits
- Radio equipment
- seismic instrument power circuits
- Motor controller circuits
- Digital display device
- Experimental setup
- Fire elevators
