ADP1879ACPZ-0.6-R7
| Parameters | |
|---|---|
| Lifecycle Status | LAST TIME BUY (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad, CSP |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1879 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.1μA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.95V~20V |
| Control Features | Enable, Power Good, Soft Start |
| Max Output Voltage | 18V |
| Topology | Buck |
| Min Input Voltage | 2.95V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 600kHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 600kHz |
| Max Duty Cycle | 65 % |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1879ACPZ-0.6-R7 Overview
With its 14-WFDFN Exposed Pad, CSP package, the switching controller fits the needs of most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 2.95V~20V voltage are supplied and operated. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. This switching controller can switch at 600kHz. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Power Good, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the DUAL position. The 14 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Search for "ADP1879" to find other relevant dc to dc converter ics. Switching converter has a total of 14 pins. There is a particular type of Switching Regulator or Controllers in switching converter. DC regulator outputs 600mV voltage according to the test statistics. voltage regulator dc to dcs with a 65 % duty cycle are designed to be reliable when powered on and powered off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulator600kHz has the maximum frequency. The value of DC to DC voltage regulator is set to ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V in order to better satisfy the requirement. Users should apply 20V to operate the voltage regulator dc to dc safely and reliably. The maximum input voltage of this dc switcher is 20V, so users must limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 2.95V. Output current will not exceed 25A. At its maximum output, the switching converter can provide 18V volts. A current of 1.1μA is supplied to it. There is 600mV voltage output lower than 600mV on the voltage controller.
ADP1879ACPZ-0.6-R7 Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 65 %
ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V
ADP1879ACPZ-0.6-R7 Applications
There are a lot of Analog Devices Inc. ADP1879ACPZ-0.6-R7 DC to DC converter applications.
- Electrical distribution systems
- Handheld GPS
- Linear guide
- Telecommunications equipment
- Precision electronic equipment
- Imported equipment
- Drilling machines
- Medical equipment
- Overvoltage protection circuits in TV sets
- Digital precision reference circuits
