ADP1879ACPZ-1.0-R7
| Parameters | |
|---|---|
| Lifecycle Status | LAST TIME BUY (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad, CSP |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1879 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.1μA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.25V~20V |
| Control Features | Enable, Power Good, Soft Start |
| Max Output Voltage | 18V |
| Topology | Buck |
| Min Input Voltage | 2.95V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 45 % |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1879ACPZ-1.0-R7 Overview
Capsuled in the 14-WFDFN Exposed Pad, CSP package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. A 3.25V~20V voltage is supplied to the dc control and used for operating it. A -40°C~125°C TJ dc switcher is not a problem. With this switching controller, you can switch at 1MHz. A generalization of dc dc regulator can be made using Surface Mount. DCDC regulator is controlled efficiently by Enable, Power Good, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. An array of 14 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. ADP1879 can be searched for other relevant dc to dc converter ics. Pins number 14 of switching converter in total. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, DC regulator outputs 600mV volts. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 45 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulators have a maximum frequency of 1MHz. Hence, ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V is used to better suit the DC to DC voltage regulator's situation. A circuit should contain 20V in order to ensure the voltage regulator dc to dc runs safely and reliably. The dc switcher's maximum input voltage is 20V, so users must limit the voltage accordingly. There must be a 2.95V supply voltage. Input current cannot exceed 25A with this dc switcher. As per its datasheet, the switching converter has a maximum output of 18V volts. 1.1μA volts is the supply current. The voltage controller's lowest voltage output is not less than 600mV.
ADP1879ACPZ-1.0-R7 Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V
ADP1879ACPZ-1.0-R7 Applications
There are a lot of Analog Devices Inc. ADP1879ACPZ-1.0-R7 DC to DC converter applications.
- Window air conditioners
- Laboratories
- Surface processing equipment
- Power supplies of electronic gadgets
- Industrial robots
- Machining centers
- SMT equipment
- Electric water heaters
- Terrestrial set-top boxes
- PSRR circuits
