ADP1882ARMZ-1.0-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MINIMUM OUTPUT VOLTAGE 0.8V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1882 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 17V |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 140μA |
| Nominal Supply Current | 70mA |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3V~20V |
| Control Features | Enable |
| Max Output Voltage | 4.67V |
| Topology | Buck |
| Min Input Voltage | 2.75V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 16 ns |
| Min Output Voltage | 800mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Duty Cycle | 45 % |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1882ARMZ-1.0-R7 Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tape & Reel (TR) surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). A 3V~20V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller can be switched at 1MHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. 10 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. In addition to "ADP1882", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 10 pins. The type is a particular Switching Regulator or Controllers of switching converter. The test statistics indicate that DC regulator outputs a voltage of 17V. In most cases, the dc dc regulator's output current is 25A. This information should be noted when you begin working with the component. The maximum duty cycle of this voltage regulator dc to dc is set to 45 % to ensure reliability during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. As a result, DC to DC voltage regulator has a value of MINIMUM OUTPUT VOLTAGE 0.8V so that the need can be met more directly. The dc switcher's maximum input voltage is 5.5V, so users must limit the voltage accordingly. Voltage 2.75V is necessary for the supply. A dc switcher can only produce an output current of 25A. The datasheet indicates that the switching converter can output 4.67V volts at its maximum. There is 140μA supply current for it. There is 800mV voltage output lower than 800mV on the voltage controller. This the controllers dc receives a 70mA nominal current supply.
ADP1882ARMZ-1.0-R7 Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
MINIMUM OUTPUT VOLTAGE 0.8V
ADP1882ARMZ-1.0-R7 Applications
There are a lot of Analog Devices Inc. ADP1882ARMZ-1.0-R7 DC to DC converter applications.
- Computer application technology
- Photovoltaic power
- Flaw detection equipment
- Computer monitoring equipment of building
- Wide-range voltage regulation circuits
- Nuclear power plants
- Digital video recorders
- Window air conditioners
- Milling machines
- Combined machine tools
