ADP1883ARMZ-1.0-R7
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | ADP1883 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 17V |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 140μA |
| Nominal Supply Current | 70mA |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3V~20V |
| Control Features | Enable |
| Max Output Voltage | 4.67V |
| Topology | Buck |
| Min Input Voltage | 2.75V |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 5.5V |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 16 ns |
| Min Output Voltage | 800mV |
| Max Duty Cycle | 45 % |
| Duty Cycle (Max) | 45% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
ADP1883ARMZ-1.0-R7 Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 1 outputs. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). DC control operates at 3V~20V volts and has 3V~20V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. The switching controller can be switched at 1MHz. A generalization of dc dc regulator can be made using Surface Mount. Switching control is made easier with the dcdc regulator's Enable. Searching "ADP1883" will return other relevant dc to dc converter ics. 10 pins are on switching converter. Test statistics indicate DC regulator outputs 17V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. The duty cycle of the voltage regulator dc to dc can be set to 45 % on power-up or power-down to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Keep dc regulator at a temperature of -40°C or above. DC regulator should run at a temperature of 125°C more than 125°C degrees Celsius. The maximum input voltage of this dc switcher is 5.5V, so users must limit the voltage accordingly. It would be 10-MSOP for this part's supplier dc dc controller package. Voltage 2.75V is necessary for the supply. The dc switcher will not provide an output current greater than 25A. The datasheet indicates that the switching converter can output 4.67V volts at its maximum. The supply current of the voltage controller is 140μA. At its lowest voltage, the voltage controller does not produce less than 800mV. This controller contains 1 phases. Voltage rating is 20V. nominal current supply for this the controllers dc is 70mA.
ADP1883ARMZ-1.0-R7 Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Enable
Max Duty Cycle: 45 %
ADP1883ARMZ-1.0-R7 Applications
There are a lot of Analog Devices Inc. ADP1883ARMZ-1.0-R7 DC to DC converter applications.
- Correction machines
- Medical equipment
- Industrial robots
- Arc suppression circuits
- Adjustable voltage or current linear circuits
- Household control circuits
- Computer rooms
- Bending machines
- Thermal power
- Handheld GPS
