Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
4-WFBGA, WLCSP |
Number of Pins |
4 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e1 |
Feature |
Slew Rate Controlled |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Resistance |
160mOhm |
Terminal Finish |
TIN SILVER COPPER |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
7.2μW |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADP190 |
Pin Count |
4 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Type |
P-Channel |
Max Output Current |
500mA |
Operating Supply Voltage |
3.6V |
Interface |
On/Off |
Operating Supply Current |
2μA |
Nominal Supply Current |
500mA |
Output Configuration |
High Side |
Power Dissipation |
7.2μW |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
500mA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
1.1V |
Max Input Voltage |
3.6V |
Nominal Input Voltage |
3.6V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.1V~3.6V |
Driver Number of Bits |
1 |
Turn On Time |
5 μs |
Rds On (Typ) |
80m Ω |
Drain to Source Resistance |
80mOhm |
Built-in Protections |
TRANSIENT |
Height |
430μm |
Length |
800μm |
Width |
800μm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADP190ACBZ-R7 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This file is included in package 4-WFBGA, WLCSP.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The lighting driver has a total of 1 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.It has a total of Slew Rate Controlled features.It belongs to the ADP190 family.The termination count is 4.It is necessary to use the 4 pins in order to operate the LED driver.There are 1 functions of the LED driver.In order to meet the operation criteria, the maximum output current drops to 500mA.It is possible to achieve a high level of efficiency with a supply voltage of 1.8V.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 4 pins.It has a resistance of 160mOhm.This case has the output current set to 500mA.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.For maximum efficiency, the supply voltage should be set to 3.6V.This LED driving board can accept voltages up to 3.6V volts as an input.A minimum input voltage of 1.1V volts is required for this LED driver.It requires a maximum current requirement of 500mA.
ADP190ACBZ-R7 Features
Supplied from 1.8V
Resistance of 160mOhm
ADP190ACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADP190ACBZ-R7 Power Switches ICs applications.
- Hot Swap
- Mobile Communication Devices
- Wireless/Networking Cards
- Handheld Devices
- Hot Swaps
- USB Protection
- Smartphone and PDA
- Portable/Handheld Devices
- USB3.1 Power Delivery
- Set-Top Boxes