banner_page

ADP191ACBZ-R7

P-Channel PMIC ADP191 4 Pin 1.2V 4-WFBGA, WLCSP


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADP191ACBZ-R7
  • Package: 4-WFBGA, WLCSP
  • Datasheet: PDF
  • Stock: 752
  • Description: P-Channel PMIC ADP191 4 Pin 1.2V 4-WFBGA, WLCSP (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 month ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-WFBGA, WLCSP
Number of Pins 4
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Load Discharge, Slew Rate Controlled
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 160mOhm
Terminal Finish TIN SILVER COPPER
Subcategory Peripheral Drivers
Max Power Dissipation 7.2μW
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.2V
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADP191
Pin Count 4
Number of Outputs 1
Output Type P-Channel
Max Output Current 500mA
Operating Supply Voltage 3.6V
Interface On/Off
Operating Supply Current 2μA
Nominal Supply Current 500mA
Output Configuration High Side
Power Dissipation 7.2μW
Output Current 500mA
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 500mA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 1.1V
Max Input Voltage 3.6V
Nominal Input Voltage 3.6V
Ratio - Input:Output 1:1
Voltage - Load 1.1V~3.6V
Driver Number of Bits 1
Turn On Time 80 μs
Rds On (Typ) 80m Ω
Built-in Protections TRANSIENT
Height Seated (Max) 0.66mm
Length 0.76mm
Width 0.76mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADP191ACBZ-R7 Overview


A Tape & Reel (TR) is used to package it.Package 4-WFBGA, WLCSP contains it.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The LED driver has a total of 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.It belongs to the ADP191 family.As a result, there are 4 terminations.The operation is carried out using the 4 pins.As far as functions are concerned, the lighting driver has 1.The maximum output current is reduced to 500mA to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 1.2V.Surface Mount is mounted in the way of this lighting driver.This LED driver is equipped with a total of 4 pins.Currently, the LED driving board has a resistance of 160mOhm ohms.This case results in a 500mA output current.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.Optimal efficiency requires a voltage of 3.6V.Input voltage is limited to 3.6V volts.The minimum input voltage is 1.1V volts.For its operation, a current of 500mA is required.

ADP191ACBZ-R7 Features


Supplied from 1.2V
Resistance of 160mOhm

ADP191ACBZ-R7 Applications


There are a lot of Analog Devices Inc. ADP191ACBZ-R7 Power Switches ICs applications.

  • PC Cards
  • USB Power Distribution
  • Storage Drives
  • Storage (HDDs, SSDs)
  • Various applications equipped with buttons
  • PDAs
  • USB Power Distribution
  • Solid-State Drives
  • Notebook PC
  • Hard Disk Drives

Write a review

Note: HTML is not translated!
    Bad           Good