banner_page

ADP194ACBZ-R7

P-Channel PMIC ADP194 4 Pin 1.8V 4-UFBGA, WLCSP


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADP194ACBZ-R7
  • Package: 4-UFBGA, WLCSP
  • Datasheet: PDF
  • Stock: 798
  • Description: P-Channel PMIC ADP194 4 Pin 1.8V 4-UFBGA, WLCSP (Kg)

Details

Tags

Parameters
Fault Protection Reverse Current
Rds On (Typ) 55m Ω
Height 330μm
Length 800μm
Width 800μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-UFBGA, WLCSP
Number of Pins 4
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Slew Rate Controlled
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 160mOhm
Terminal Finish TIN SILVER COPPER
Max Power Dissipation 7.2μW
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADP194
Pin Count 4
Number of Outputs 1
Output Type P-Channel
Max Output Current 500mA
Operating Supply Voltage 3.6V
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Operating Supply Current 700nA
Output Configuration High Side
Power Dissipation 7.2μW
Output Current 500mA
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 1.1V
Max Input Voltage 3.6V
Nominal Input Voltage 3.6V
Ratio - Input:Output 1:1
Voltage - Load 1.1V~3.6V

ADP194ACBZ-R7 Overview


It is packaged in the manner of a Tape & Reel (TR).This file is included in package 4-UFBGA, WLCSP.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.The lighting driver is equipped with 1 outputs that can be used.A supply voltage of Not Required is required for it to operate.A maximum output voltage of P-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Slew Rate Controlled features.It is part of the ADP194 family of LED drivers.There are 4 terminations in it.For operation, 4 pins are used.It contains 1 functions.Maximum output current falls to 500mA when operation criteria are met.It is possible to obtain high efficiency with a supply voltage of 1.8V.This lighting driver is mounted in the way of Surface Mount.4 pins are equipped with it.Lighting drivers with 160mOhm resistance are used.In this case, the output current is set to 500mA.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.We currently have 1 channels available.Optimal efficiency requires a voltage of 3.6V.There is a maximum input voltage of 3.6V volts.A minimum input voltage of 1.1V volts is required for this LED driver.

ADP194ACBZ-R7 Features


Supplied from 1.8V
Resistance of 160mOhm
1 channels

ADP194ACBZ-R7 Applications


There are a lot of Analog Devices Inc. ADP194ACBZ-R7 Power Switches ICs applications.

  • Portable Music Players
  • HDD and SSD
  • HDD, SSD
  • PDAs
  • Low Voltage I/O System Power
  • Storage (HDDs, SSDs)
  • PC Cards
  • Wireless/Networking Cards
  • USB3.1 Power Delivery
  • Portable Video Game Players

Write a review

Note: HTML is not translated!
    Bad           Good