ADP195ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad, CSP |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 360μW |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADP195 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.1A |
| Operating Supply Voltage | 3.6V |
| Voltage | 3.6V |
| Interface | On/Off |
| Operating Supply Current | 5μA |
| Current | 200mA |
| Output Configuration | High Side |
| Power Dissipation | 360μW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.1V |
| Max Input Voltage | 3.6V |
| Output Current per Channel | 500mA |
| Nominal Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~3.6V |
| Driver Number of Bits | 1 |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 50m Ω |
| Height | 600μm |
| Length | 2mm |
| Width | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP195ACPZ-R7 Overview
Tape & Reel (TR) is how it's packaged.It is included in the package 6-UDFN Exposed Pad, CSP.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.The LED driver has 1 outputs.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.Features of the lighting driver are Slew Rate Controlled.It is part of the ADP195 family of LED drivers.It contains 6 terminations.The operation is carried out using the 6 pins.As far as functions are concerned, the lighting driver has 1.This results in the maximum output current dropping to 1.1A to meet the operation criteria.As long as the supply voltage is 1.8V, high efficiency can be achieved.The lighting driver is mounted in the way of Surface Mount.6 pins are equipped with it.Currently, the LED driving board has a resistance of 50mOhm ohms.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to maximize efficiency, the supply voltage should be set at 3.6V.This LED driver can handle voltages up to 3.6V volts.There is a minimum input voltage of 1.1V volts for this LED driver.
ADP195ACPZ-R7 Features
Supplied from 1.8V
Resistance of 50mOhm
ADP195ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADP195ACPZ-R7 Power Switches ICs applications.
- Handheld Devices
- Mobile Communication Devices
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- Hot-Swap Systems
- USB Power Distribution
- Low Voltage I/O System Power
- Wireless Modem Data Cards
- PDAs
- Storage Drives
