ADP196ACBZ-01-R7
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 15mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP196 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Interface | On/Off |
| Operating Supply Current | 250nA |
| Nominal Supply Current | 3A |
| Output Configuration | High Side |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 10m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Width | 0.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 65.99769mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Active |
ADP196ACBZ-01-R7 Overview
It is packaged in the manner of a Tape & Reel (TR).In the 6-WFBGA, WLCSP package, it is included.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~105°C TJ for reliable performance.There is a default setting of 1 for output.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.The ADP196 family consists of this type.There are 6 terminations in it.The 6 pins are used to operate the LED driver.As far as functions are concerned, the lighting driver has 1.To meet the operation criteria, the maximum output current drops to 3A.It is possible to obtain high efficiency with a supply voltage of 3.2V.The lighting driver is mounted in the direction of Surface Mount.There are 6 pins in total on this board.Currently, the LED driving board has 15mOhm resistance.In this case, the output current is set to 3A.This LED driver can handle voltages up to 5.5V volts.There is a minimum input voltage of 1.8V volts.
ADP196ACBZ-01-R7 Features
Supplied from 3.2V
Resistance of 15mOhm
ADP196ACBZ-01-R7 Applications
There are a lot of Analog Devices Inc. ADP196ACBZ-01-R7 Power Switches ICs applications.
- Portable Music Players
- Hot-Swap Systems
- PC Cards
- Storage Drives
- Set-Top Boxes
- Solid State Drivers
- USB Power Distribution
- Hot Swaps
- Portable Video Game Players
- Telecom and Network Systems
