ADP196ACBZ-R7
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, WLCSP |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 15mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP196 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Operating Supply Current | 250nA |
| Output Configuration | High Side |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 4A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 10m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 380μm |
| Length | 1.5mm |
| Width | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ADP196ACBZ-R7 Overview
It is packaged in the manner of a Tape & Reel (TR).There is a 6-WFBGA, WLCSP package that includes it.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type it owns.The temperature should be set to -40°C~105°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Slew Rate Controlled features are available on the lighting driver.It comes under the family of ADP196.A total of 6 terminations have been recorded.The 6 pins are used to operate the LED driver.There are 1 functions of the LED driver.It is necessary to reduce the maximum output current to 3A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.2V.This lighting driver is mounted in the way of Surface Mount.A total of 6 pins are included in this LED driver.Currently, the LED driving board has a resistance of 15mOhm ohms.As a result, the output current is set to 3A.For maximum efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.The input voltage minimum is 1.8V volts.It has a maximum current requirement of 4A.
ADP196ACBZ-R7 Features
Supplied from 3.2V
Resistance of 15mOhm
ADP196ACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADP196ACBZ-R7 Power Switches ICs applications.
- USB3.1 Power Delivery
- Solid-State Drives
- USB Power Distribution
- Notebook and Tablet Computers
- Telecom and Network Systems
- Portable Video Game Players
- Storage (HDDs, SSDs)
- PC Card Hot Swap
- HDD and SSD
- Hot Swap
