ADP196ACPZN-01-R7
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad, CSP |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 36mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.2V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP196 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Operating Supply Current | 250nA |
| Output Configuration | High Side |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 4A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 10m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
ADP196ACPZN-01-R7 Overview
Tape & Reel (TR) is how it's packaged.This file is included in package 6-UDFN Exposed Pad, CSP.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~105°C TJ.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is equipped with Load Discharge, Slew Rate Controlled features.It is a member of the ADP196 family.A total of 6 terminations have been recorded.For operation, we use the 6 pins.It contains 1 functions.This results in the maximum output current dropping to 3A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 3.2V.Surface Mount is mounted in the way.A total of 6 pins are present on it.Currently, the LED driving board has 36mOhm resistance.This case has the output current set to 4A.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.There is a maximum input voltage of 5.5V volts.The input voltage minimum is 1.8V volts.It operates at a maximum current of 4A.
ADP196ACPZN-01-R7 Features
Supplied from 3.2V
Resistance of 36mOhm
ADP196ACPZN-01-R7 Applications
There are a lot of Analog Devices Inc. ADP196ACPZN-01-R7 Power Switches ICs applications.
- PC Cards
- Storage (HDDs, SSDs)
- Set-Top Boxes
- Portable GPS Device
- USB3.1 Power Delivery
- Portable Video Game Players
- PC Card Hot Swap
- Gaming
- Wearable Devices
- Telecom and Network Systems
