Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-UDFN Exposed Pad, CSP |
Number of Pins |
6 |
Operating Temperature |
-40°C~105°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Slew Rate Controlled |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
36mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.2V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADP196 |
Pin Count |
6 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
3A |
Operating Supply Voltage |
5.5V |
Interface |
On/Off |
Operating Supply Current |
250nA |
Output Configuration |
High Side |
Output Current |
5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
4A |
Input Type |
Non-Inverting |
Turn On Delay Time |
2 ms |
Switch Type |
General Purpose |
Min Input Voltage |
1.8V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.8V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Output Peak Current Limit-Nom |
4A |
Rds On (Typ) |
10m Ω |
Built-in Protections |
OVER CURRENT; THERMAL |
Length |
2mm |
Width |
2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADP196ACPZN-R7 Overview
It is packaged in the form of a Tape & Reel (TR).It's included in the 6-UDFN Exposed Pad, CSP package.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~105°C TJ.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.As far as features are concerned, the LED driving board has Slew Rate Controlled.This object belongs to the ADP196 family.The termination count is 6.In order to operate, the 6 pins are used.Currently, there are 1 functions associated with the lighting driver.It is necessary to reduce the maximum output current to 3A to meet the operation criteria.High efficiency is possible at 3.2V supply voltage.As a result, it is mounted in the manner of Surface Mount.A total of 6 pins are present on it.36mOhm is the resistance of the lighting driver.It is set to 5A in this case.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.The maximum input voltage is 5.5V volts.The input voltage minimum is 1.8V volts.4A is the maximum current required to operate it.
ADP196ACPZN-R7 Features
Supplied from 3.2V
Resistance of 36mOhm
ADP196ACPZN-R7 Applications
There are a lot of Analog Devices Inc. ADP196ACPZN-R7 Power Switches ICs applications.
- Portable GPS Device
- Wireless Modem Data Cards
- Portable Video Game Players
- Wearable Devices
- Telecom and Network Systems
- Notebook and Tablet Computers
- USB Ports/Hubs
- Notebook PC
- Storage (HDDs, SSDs)
- Smartphone and PDA