ADP197ACBZ-01-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, WLCSP |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 12mOhm |
| Max Power Dissipation | 24μW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADP197 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 18μA |
| Output Configuration | High Side |
| Power Dissipation | 24μW |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 3A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Fault Protection | Over Temperature |
| Rds On (Typ) | 12m Ω |
| Width | 0.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP197ACBZ-01-R7 Overview
It is packaged in the form of a Tape & Reel (TR).It is included in the package 6-WFBGA, WLCSP.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.It is best to set the temperature to -40°C~105°C TJ to ensure reliable operation.There is a default setting of 1 for output.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Features of the lighting driver are Slew Rate Controlled.As you can see, it comes from the ADP197 family.It contains 6 terminations.The 6 pins are used to operate the LED driver.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 3A.High efficiency is possible at 1.8V supply voltage.As a result, it is mounted in the manner of Surface Mount.There are 6 pins in total on this board.There is 12mOhm resistance on the LED driver.When this case is used, the output current is set to 3A.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.In order to maximize efficiency, the supply voltage should be set at 5.5V.Input voltage is limited to 5.5V volts.A minimum input voltage of 1.8V volts is required for this LED driver.
ADP197ACBZ-01-R7 Features
Supplied from 1.8V
Resistance of 12mOhm
1 channels
ADP197ACBZ-01-R7 Applications
There are a lot of Analog Devices Inc. ADP197ACBZ-01-R7 Power Switches ICs applications.
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
- Portable Music Players
- USB Ports/Hubs
- PC Card Hot Swap
- Portable Video Game Players
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Solid-State Drives
- Telecom and Network Systems
