ADP197ACBZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, WLCSP |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 12mOhm |
| Terminal Finish | TIN SILVER COPPER |
| Max Power Dissipation | 24μW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.4V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP197 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 18μA |
| Output Configuration | High Side |
| Power Dissipation | 24μW |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Fault Protection | Over Temperature |
| Rds On (Typ) | 12m Ω |
| Height | 380μm |
| Length | 1.5mm |
| Width | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP197ACBZ-R7 Overview
Cut Tape (CT) is the way it's packaged.This package is included in 6-WFBGA, WLCSP.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~105°C TJ.By default, it is set to output 1.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Slew Rate Controlled features.I believe it belongs to the ADP197 family.There are 6 terminations in it.The operation is performed through the 6 pins.Currently, the lighting driver has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 3A.Supply voltages of 3.4V allow for high efficiency.It is positioned in the direction of Surface Mount.This LED driver is equipped with a total of 6 pins.It has a resistance of 12mOhm.The output current is set to 3A in this case.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.To choose from, there are 1 channels.The supply voltage should be set at 5.5V for best efficiency.It has a maximum input voltage of 5.5V volts.It requires 1.8V volts as the minimum input voltage.
ADP197ACBZ-R7 Features
Supplied from 3.4V
Resistance of 12mOhm
1 channels
ADP197ACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADP197ACBZ-R7 Power Switches ICs applications.
- Hot-Swap Systems
- Set-top-box
- Handheld Devices
- HDD, SSD
- Notebook and Tablet Computers
- Smart Phones, Feature Phones
- Wearable Devices
- USB Protection
- Portable GPS Device
- Wireless Headsets
