ADP198ACBZ-11-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 40mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Technology | DMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP198 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 6.5V |
| Power Supplies | 2.8V |
| Interface | On/Off |
| Operating Supply Current | 1.1μA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.65V |
| Max Input Voltage | 6.5V |
| Output Current per Channel | 1A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.65V~6.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 40m Ω |
| Width | 0.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP198ACBZ-11-R7 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This package is included in 4-UFBGA, WLCSP.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.A maximum output voltage of P-Channel volts has been specified.It has a total of Slew Rate Controlled features.It is part of the ADP198 family of LED drivers.The termination count is 4.The 4 pins are used for the operation of the system.It contains 1 functions.The maximum output current is reduced to 1A to meet the operation criteria.With a supply voltage of 2.8V, high efficiency is possible.The lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 4 pins.Currently, the LED driving board has a resistance of 40mOhm ohms.This case has the output current set to 1A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The power supply of the part is 2.8V.In order to maximize efficiency, the supply voltage should be set at 6.5V.The maximum input voltage of the LED driver is 6.5V volts.As far as input voltage goes, it has a minimum of 1.65V volts.
ADP198ACBZ-11-R7 Features
Supplied from 2.8V
Resistance of 40mOhm
ADP198ACBZ-11-R7 Applications
There are a lot of Analog Devices Inc. ADP198ACBZ-11-R7 Power Switches ICs applications.
- Hot Swap
- Wearable Devices
- Portable GPS
- USB Protection
- USB Power Distribution
- Low Voltage I/O System Power
- HDD, SSD
- Set-Top Boxes
- PC Cards
- Solid State Drivers
