Parameters |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
4-UFBGA, WLCSP |
Number of Pins |
4 |
Weight |
68.407399mg |
Operating Temperature |
-40°C~85°C TJ |
Packaging |
Cut Tape (CT) |
Feature |
Slew Rate Controlled |
Pbfree Code |
no |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Resistance |
40mOhm |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
ADP199 |
Pin Count |
4 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
500mA |
Operating Supply Voltage |
3.6V |
Supply Voltage-Min (Vsup) |
0.9V |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Operating Supply Current |
900nA |
Nominal Supply Current |
500mA |
Output Configuration |
High Side |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Turn On Delay Time |
20 μs |
Switch Type |
General Purpose |
Min Input Voltage |
900mV |
Max Input Voltage |
3.6V |
Nominal Input Voltage |
3.6V |
Turn-Off Delay Time |
60 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
0.9V~3.6V |
Rds On (Typ) |
40m Ω |
Height |
330μm |
Length |
800μm |
Width |
800μm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADP199ACBZ-R7 Overview
It is packaged in the form of a Cut Tape (CT).The 4-UFBGA, WLCSP package contains it.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TJ.There is a default setting of 1 for output.Operation is based on Not Required supply voltage.The maximum output voltage is P-Channel volts.It has a total of Slew Rate Controlled features.It is a member of the ADP199 family.It consists of 4 terminations in total.In order to operate, 4 pins are used.It consists of 1 functions.In order to meet the operation criteria, the maximum output current drops to 500mA.A supply voltage of 1.8V leads to high efficiency.It is mounted in the way of Surface Mount.4 pins are connected to it in total.Lighting drivers with 40mOhm resistance are used.As a result, the output current is set to 500mA.In order to operate normally, the supply voltage (Vsup) must remain above 0.9V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.For maximum efficiency, the supply voltage should be set to 3.6V.Voltage input is limited to 3.6V volts.The minimum input voltage is 900mV volts.
ADP199ACBZ-R7 Features
Supplied from 1.8V
Resistance of 40mOhm
1 channels
ADP199ACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADP199ACBZ-R7 Power Switches ICs applications.
- Notebook PC
- Smart Phones, Feature Phones
- Telecom and Network Systems
- USB Power Distribution
- Smartphone and PDA
- PC Card Hot Swap
- USB Ports/Hubs
- USB Protection
- Portable Music Players
- PC Cards