ADP2102YCPZ-4-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad, CSP |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADP2102 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 95 % |
| Output Voltage | 3.3V |
| Output Type | Adjustable |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 99μA |
| Nominal Supply Current | 99μA |
| Output Configuration | Positive |
| Max Output Voltage | 3.3V |
| Voltage - Output (Min/Fixed) | 2.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 3MHz |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Voltage - Output (Max) | 3.3V |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP2102YCPZ-4-R7 Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. As you can see, this harley voltage regulator contains 16 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. Space-saving 8-VFDFN Exposed Pad, CSP packages are available for this harley voltage regulator. There are 1 outputs configured on this voltage regulator 12v. The adjusting voltage regulator generates Adjustable output. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. This voltage regulator 12v reaches a switching frequency of 3MHz. Despite its low input voltage, this voltage regulator can operate. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 2.5V. A regulator with this 260 peak reflow temperature is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. As part of the ADP2102 series of regulators, the voltage regulators can be found. The voltage DC DC switching regulator can produce is 3.3V volts. The switching regulator operation of the system is controlled by 8 pins. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 800mV. Switching regulator has a maximum output current of 600mA A, which is sufficient to meet the requirements of operation. 3.3V's maximal output voltage allows adjusting voltage regulator to operate easily. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 3.3V. Switching regulators such as this operate from voltages of 5.5V. A 99μA supply current is required to power this voltage regulator.
ADP2102YCPZ-4-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 5.5V
ADP2102YCPZ-4-R7 Applications
There are a lot of Analog Devices Inc. ADP2102YCPZ-4-R7 Voltage Regulators applications.
- Adjustable voltage or current linear circuits
- Packaging
- Computer application technology
- Gear/thread machining machines
- Terrestrial set-top boxes
- Alternators
- Sensitive electronic devices
- Bending machines
- Experimental setup
- Motor controller circuits
