ADP2108ACBZ-2.5-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-WFBGA, WLCSP |
| Number of Pins | 5 |
| Weight | 42.013993mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP2108 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 2.5V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Voltage - Input (Min) | 2.3V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 30μA |
| Nominal Supply Current | 30μA |
| Output Configuration | Positive |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 3MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 2.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP2108ACBZ-2.5-R7 Overview
As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. In this voltage regulator, there are 5 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. For space-saving purposes, this voltage regulator is available in the 5-WFBGA, WLCSP package. In this case, DC DC switching regulator has 1 outputs configured to it. Fixed outputs are generated on the output pins of this adjusting voltage regulator. The voltage regulator 12v fits the Surface Mount mounting hole. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TA. In this voltage regulator 12v, the switching frequency is 3MHz. This voltage regulator is able to operate with the minimal input voltage of 2.3V. Voltage regulator has an input voltage (Max) of 5.5V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. ADP2108 is a family of voltage regulators that belong to the DC/DC industry. Voltage can be produced at 2.5V volts by voltage regulator. There are 5 pins used for switching regulator operation. The output voltage of this voltage regulator 12v should at least be set at 2.5V volts at all times. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 600mA A. Powered by a 30μA supply current, this DC-DC switching regulator works as a converter between DC and DC.
ADP2108ACBZ-2.5-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
5 pins
ADP2108ACBZ-2.5-R7 Applications
There are a lot of Analog Devices Inc. ADP2108ACBZ-2.5-R7 Voltage Regulators applications.
- Handheld GPS
- Overvoltage protection circuits in TV sets
- Television equipment
- Nuclear power plants
- Planers
- Bending machines
- CMM
- Access control systems
- Medical equipment
- Analog precision reference circuits
