Parameters |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-WFQFN Exposed Pad, CSP |
Number of Pins |
24 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
24 |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADP2165 |
Function |
Step-Down |
Number of Outputs |
1 |
Output Voltage |
2.5V |
Output Type |
Fixed |
Max Output Current |
5A |
Operating Supply Voltage |
5.5V |
Voltage - Input (Min) |
2.7V |
Input Voltage-Nom |
5V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Voltage - Output (Min/Fixed) |
2.5V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
250kHz~1.4MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Min Output Voltage |
2.5V |
Height Seated (Max) |
0.8mm |
Length |
4mm |
Width |
4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADP2165ACPZ-2.5-R7 Overview
It is designed to provide optimal performance by utilizing the Cut Tape (CT) package. This harley voltage regulator has 24 terminations. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHING REGULATOR voltage regulator. There is a 24-WFQFN Exposed Pad, CSP package available for this voltage regulator, as DC DC switching regulator is space-saving. The voltage regulator is configured with 1 outputs. On its output pins, this adjusting voltage regulator generates Fixed output. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. There is a switching frequency of 250kHz~1.4MHz for this voltage regulator 12v. Input voltage 2.7V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 2.5V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 5V. As part of the ADP2165 series of regulators, the voltage regulators can be found. Voltage regulator is capable of giving voltage at 2.5V volts. 24 pins are used for switching regulator operation. There should be at least a 2.5V volt output voltage for this switching regulator in order to make it work properly. A maximum output current of 5A A is provided to meet the switching regulator operation requirements. With 5.5V as the supply voltage, this DC-DC switching regulator will operate.
ADP2165ACPZ-2.5-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
24 pins
Operating supply voltage of 5.5V
ADP2165ACPZ-2.5-R7 Applications
There are a lot of Analog Devices Inc. ADP2165ACPZ-2.5-R7 Voltage Regulators applications.
- Surge protection circuits
- Planers
- Direct power supply system
- Milling machines
- Domestic water pumps
- Textile machinery
- Grinders
- Overvoltage protection circuits in TV sets
- Packaging
- Communication system