ADP2323ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO HAS A CONTROL TECHNIQUE OF PFM |
| Subcategory | Switching Regulator or Controllers |
| Technology | DMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP2323 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 1.2V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~20V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Max Output Voltage | 16V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 600kHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 800mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Duty Cycle | 90 % |
| Clock Sync | Yes |
| Height | 730μm |
| Length | 5mm |
| Width | 5.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP2323ACPZ-R7 Overview
It comes in the 32-WFQFN Exposed Pad, CSP package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 4.5V~20V voltage are supplied and operated. Work well in dc switchers with a -40°C~125°C TJ. A switching controller such as this can switch at a value of 600kHz . dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Enable, Frequency Control, Power Good, Soft Start, Tracking which allows efficient switching control. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a QUAD terminal on the switching converters. A variety of terminations with 32 of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 12V. In addition to "ADP2323", there are other relevant dc to dc converter ics you can find. Total pins of switching converter are 32. Switching converter is a special type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 1.2V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 3A. It is set to 90 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC to DC voltage regulator has a value of ALSO HAS A CONTROL TECHNIQUE OF PFM to better satisfy the need. In order to limit the voltage of a dc switcher whose maximum input voltage is 20V, it must be limited by the user. A voltage of 4.5V is required for the supply. Output current will not exceed 3A. The datasheet indicates that the switching converter can output 16V volts at its maximum. There is a 3mA volt supply current. At least 800mV voltage is output by the voltage controller.
ADP2323ACPZ-R7 Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
ALSO HAS A CONTROL TECHNIQUE OF PFM
ADP2323ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADP2323ACPZ-R7 DC to DC converter applications.
- Analog precision reference circuits
- Cutting machine tools
- Direct power supply system
- Packaging
- Thermal power
- Various CNC machine tools
- Gear/thread machining machines
- Smoke exhaust equipment
- Industrial controllers
- ATMs
