ADP2325ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | DMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP2325 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Max Output Current | 5A |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 2.5mA |
| Output Configuration | Positive |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~20V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Max Output Voltage | 16V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 600kHz |
| Max Input Voltage | 20V |
| Synchronous Rectifier | No |
| Min Output Voltage | 800mV |
| Max Duty Cycle | 90 % |
| Clock Sync | Yes |
| Height | 730μm |
| Length | 5mm |
| Width | 5.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP2325ACPZ-R7 Overview
Capsuled in the 32-WFQFN Exposed Pad, CSP package, the switching controller suits most application needs. For 2 outputs, the dc motor controller is appropriate. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~20V volts and has 4.5V~20V supply voltage. Work well in dc switchers with a -40°C~125°C TJ. The switching controller can be switched at 600kHz. dc dc regulator can be generalized using Surface Mount. Enable, Frequency Control, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with SWITCHING REGULATOR analog outputs. Switching converters are designed with the terminal (s) at position QUAD . Various 32 terminations. In addition to "ADP2325", there are other relevant dc to dc converter ics you can find. Pins number 32 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. If you are starting a new project, you should note the dc dc regulator's typical output current is 5A. Voltage regulator dc to dc is designed to operate at 90 % duty cycle during power-ups and power-downs to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 20V. Voltage 4.5V is necessary for the supply. Input current cannot exceed 5A with this dc switcher. Datasheets indicate that the switching converter can output 16V volts at its maximum. At its lowest voltage, the voltage controller does not produce less than 800mV. This the controllers dc receives a 2.5mA nominal current supply.
ADP2325ACPZ-R7 Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
Max Duty Cycle: 90 %
ADP2325ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADP2325ACPZ-R7 DC to DC converter applications.
- Automation technology
- Boring machines
- CNC system
- Access control systems
- Radio equipment
- Emergency lighting monitoring equipment
- USB circuits
- Gear/thread machining machines
- Flaw detection equipment
- Remotely powered electric motors
