Parameters |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-WFDFN Exposed Pad, CSP |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Switching Regulator or Controllers |
Technology |
DMOS |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADP2370 |
Function |
Step-Down |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Efficiency |
92 % |
Output Voltage |
1.2V |
Output Type |
Fixed |
Max Output Current |
800mA |
Operating Supply Voltage |
15V |
Voltage - Input (Min) |
3.2V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
700μA |
Nominal Supply Current |
700μA |
Output Configuration |
Positive |
Max Output Voltage |
14V |
Voltage - Output (Min/Fixed) |
1.2V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
600kHz~1.2MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Min Output Voltage |
800mV |
Length |
3mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADP2370ACPZ-1.2-R7 Overview
For optimal performance, this voltage regulator uses the Cut Tape (CT) package. In this voltage regulator, there are 8 terminations. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. Space-saving 8-WFDFN Exposed Pad, CSP packages are available for this harley voltage regulator. There are 1 outputs configured on the voltage regulator. The adjusting voltage regulator generates Fixed output. Switching regulators like this one can be mounted on the Surface Mount mounting system. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. A DC-DC switching regulator such as this one switches at 600kHz~1.2MHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 1.2V. A regulator with this 260 peak reflow temperature is essentially indestructible. A voltage regulator 12v such as this falls under the Switching Regulator or Controllers category and belongs to this category. DC/DC regulators such as this one belong to the ADP2370 family of products. The voltage DC DC switching regulator can provide is up to 1.2V volts. The switching regulator operation is carried out by 8 pins. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 800mV. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 800mA A. With a maximum output voltage of 14V, DC DC switching regulator has a very high efficiency. An input voltage of 15V is used to operate this harley voltage regulator. The voltage regulator operates with a supply current of 700μAmps.
ADP2370ACPZ-1.2-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 15V
ADP2370ACPZ-1.2-R7 Applications
There are a lot of Analog Devices Inc. ADP2370ACPZ-1.2-R7 Voltage Regulators applications.
- Cutting machine tools
- Remotely powered electric motors
- Surface processing equipment
- Mobile phones
- Window air conditioners
- Low output voltage switching power supply circuits
- Linear guide
- Telecommunications equipment
- Network technology
- Drilling machines