Parameters |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADP2370 |
Function |
Step-Down |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Efficiency |
92 % |
Output Voltage |
2.5V |
Output Type |
Fixed |
Max Output Current |
800mA |
Operating Supply Voltage |
15V |
Voltage - Input (Min) |
3.2V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
700μA |
Nominal Supply Current |
700μA |
Output Configuration |
Positive |
Max Output Voltage |
14V |
Voltage - Output (Min/Fixed) |
2.5V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
600kHz~1.2MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Min Output Voltage |
800mV |
Length |
3mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-WFDFN Exposed Pad, CSP |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Switching Regulator or Controllers |
Technology |
DMOS |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
ADP2370ACPZ-2.5-R7 Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. As you can see, this harley voltage regulator contains 8 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. In order to save space, this voltage regulator is packaged in the 8-WFDFN Exposed Pad, CSP package. 1 outputs of voltage regulator are configured. This DC DC switching regulator generates Fixed output on its output pins. This switching regulator is designed to fit the Surface Mount mounting system. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. In this voltage regulator 12v, the switching frequency is 600kHz~1.2MHz. Input voltage 3.2V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. There is a adjusting voltage regulator's voltage output (Min/Fixed) of 2.5V. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. A voltage regulator 12v such as this falls under the Switching Regulator or Controllers category and belongs to this category. As part of the ADP2370 series of regulators, the voltage regulators can be found. The voltage DC DC switching regulator can produce is 2.5V volts. The switching regulator operation is carried out by 8 pins. There should be at least a 800mV volt output voltage for this switching regulator in order to make it work properly. The maximum output current reaches 800mA A to meet the switching regulator operation requirements. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 14V. Switching regulators operate at 15V supply voltages. DC-DC switching regulators operate with 700μA supply currents.
ADP2370ACPZ-2.5-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 15V
ADP2370ACPZ-2.5-R7 Applications
There are a lot of Analog Devices Inc. ADP2370ACPZ-2.5-R7 Voltage Regulators applications.
- Program control systems
- Sensitive electronic devices
- Laboratories
- Packaging
- Alternators
- Hydro power
- Direct power supply system
- Wide-range voltage regulation circuits
- Large fire protection systems
- Boring machines