Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-WFDFN Exposed Pad, CSP |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Switching Regulator or Controllers |
Technology |
DMOS |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADP2370 |
Function |
Step-Down |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Efficiency |
92 % |
Output Voltage |
3V |
Output Type |
Fixed |
Max Output Current |
800mA |
Operating Supply Voltage |
15V |
Voltage - Input (Min) |
3.2V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
700μA |
Nominal Supply Current |
700μA |
Output Configuration |
Positive |
Max Output Voltage |
14V |
Voltage - Output (Min/Fixed) |
3V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
600kHz~1.2MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Min Output Voltage |
800mV |
Length |
3mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADP2370ACPZ-3.0-R7 Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. There are 8 terminations in this harley voltage regulator. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. Space-saving 8-WFDFN Exposed Pad, CSP packages are available for this harley voltage regulator. 1 outputs of voltage regulator are configured. This DC DC switching regulator generates Fixed output on its output pins. The voltage regulator 12v fits the Surface Mount mounting hole. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. The switching frequency of this DC-DC switching regulator reaches 600kHz~1.2MHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 3.2V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 3V. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. As part of the ADP2370 series of regulators, the voltage regulators can be found. At 3V volts, voltage regulator can provide voltage. In order to operate voltage regulator, there are 8 pins that must be connected. This voltage regulator 12v should be configured with an output voltage that is at least 800mV. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 800mA A. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 14V. 15V is the supply voltage for this DC-DC switching regulator. Powered by a 700μA supply current, this DC-DC switching regulator operates on a DC-DC voltage.
ADP2370ACPZ-3.0-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 15V
ADP2370ACPZ-3.0-R7 Applications
There are a lot of Analog Devices Inc. ADP2370ACPZ-3.0-R7 Voltage Regulators applications.
- Lathes
- Handheld GPS
- Direct power supply system
- Wide-range voltage regulation circuits
- Planers
- seismic instrument power circuits
- Television equipment
- Serial communication converter
- Industrial controllers
- Smoke prevention equipment