Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-WFDFN Exposed Pad, CSP |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Switching Regulator or Controllers |
Technology |
DMOS |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADP2371 |
Function |
Step-Down |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Efficiency |
92 % |
Output Voltage |
3.3V |
Output Type |
Fixed |
Max Output Current |
800mA |
Operating Supply Voltage |
15V |
Voltage - Input (Min) |
3.2V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
700μA |
Nominal Supply Current |
700μA |
Output Configuration |
Positive |
Max Output Voltage |
14V |
Voltage - Output (Min/Fixed) |
3.3V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
600kHz~1.2MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Min Output Voltage |
800mV |
Length |
3mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADP2371ACPZ-3.3-R7 Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. As you can see, this harley voltage regulator contains 8 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. In order to save space, this voltage regulator is packaged in the 8-WFDFN Exposed Pad, CSP package. 1 outputs of voltage regulator are configured. Fixed outputs are generated on the output pins of this adjusting voltage regulator. Surface Mount-mount switching regulator. Keeping dc to dc voltage regulator's operating temperature at -40°C~85°C TA is essential when operating. This voltage regulator 12v reaches a switching frequency of 600kHz~1.2MHz. Voltage regulators like this one can operate at least with 3.2V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 3.3V. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. A voltage regulator 12v such as this falls under the Switching Regulator or Controllers category and belongs to this category. As part of the ADP2371 series of regulators, the voltage regulators can be found. Voltage of voltage regulator can be delivered at 3.3V volts. In order to operate voltage regulator, 8 pins are required. Ideally this switch regulator should have an output voltage of about 800mV at the very least. A maximum output current of 800mA A is provided to meet the switching regulator operation requirements. A maximum voltage of 14V can be obtained from the regulator voltage. With 15V as the supply voltage, this DC-DC switching regulator will operate. DC-DC switching regulator operating on 700μA supply voltage.
ADP2371ACPZ-3.3-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 15V
ADP2371ACPZ-3.3-R7 Applications
There are a lot of Analog Devices Inc. ADP2371ACPZ-3.3-R7 Voltage Regulators applications.
- Television equipment
- Surface processing equipment
- Smart grid
- Adjustable voltage or current linear circuits
- Printing
- Drilling machines
- Access control systems
- Program control systems
- Industrial robots
- Pipe bending machines