ADP2386ACPZN-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad, CSP |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | DMOS |
| Terminal Position | UNSPECIFIED |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP2386 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Voltage - Input (Max) | 20V |
| Output Voltage | 18V |
| Output Type | Adjustable |
| Max Output Current | 6A |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 3.6mA |
| Output Configuration | Positive |
| Max Output Voltage | 18V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~1.4MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP2386ACPZN-R7 Overview
It is designed to provide optimal performance by utilizing the Cut Tape (CT) package. In this voltage regulator, there are a total of 24 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 24-WFQFN Exposed Pad, CSP package. In this case, DC DC switching regulator has 1 outputs configured to it. There are output pins on this DC DC switching regulator that generate Adjustable output. A Surface Mount mounting is required for this switching regulator. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. DC-DC switching regulators reach 200kHz~1.4MHz switching frequencies. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 4.5V. The output voltage (Min/Fixed) of this voltage regulator 12v is 0.6V. The maximum input voltage of this voltage regulator 12v is 20V. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. For operation, switching regulator requires a nominal input voltage of 12V. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. As part of the ADP2386 series of regulators, the voltage regulators can be found. Voltage regulator is capable of giving voltage at 18V volts. In order to operate voltage regulator, there are 24 pins that must be connected. There should be at least a 600mV volt output voltage for this switching regulator in order to make it work properly. A 6A A maximum output current is required to meet the switching regulator operation requirements. It provides the adjusting voltage regulator's maximal output voltage of 18V.
ADP2386ACPZN-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
24 pins
ADP2386ACPZN-R7 Applications
There are a lot of Analog Devices Inc. ADP2386ACPZN-R7 Voltage Regulators applications.
- Overvoltage protection circuits in TV sets
- Plate bending machines
- Communication system
- Handheld GPS
- Packaging
- Hydro power
- Post equipment
- Game consoles
- Textile machinery
- Computer application technology
