Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
10-VFDFN Exposed Pad, CSP |
Number of Pins |
10 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADP2503 |
Function |
Step-Up/Step-Down |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Voltage |
4.5V |
Output Type |
Fixed |
Max Output Current |
600mA |
Operating Supply Voltage |
5.5V |
Voltage - Input (Min) |
2.3V |
Input Voltage-Nom |
3.6V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
50μA |
Nominal Supply Current |
50μA |
Output Configuration |
Positive |
Max Output Voltage |
5.5V |
Voltage - Output (Min/Fixed) |
4.5V |
Topology |
Buck-Boost |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
2.5MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Min Output Voltage |
2.8V |
Height Seated (Max) |
0.85mm |
Length |
3mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADP2503ACPZ-4.5-R7 Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. In this voltage regulator, 10 terminations are present. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. The harley voltage regulator is available as a 10-VFDFN Exposed Pad, CSP package to save space. DC DC switching regulator is configured with 1 outputs. DC DC switching regulators like this one generate Fixed outputs on their output pins to handle the power management. Surface Mount-mount switching regulator. During switching regulator operation, the operating temperature should remain at -40°C~125°C TA. 2.5MHz is the switching frequency of this DC-DC switching regulator. This voltage regulator is able to operate with the minimal input voltage of 2.3V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 4.5V. A regulator with this 260 peak reflow temperature is essentially indestructible. For operation, voltage regulator provides a nominal input voltage of 3.6V. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. ADP2503 is a family of voltage regulators that belong to the DC/DC industry. The voltage DC DC switching regulator can provide is up to 4.5V volts. The switching regulator operation of the system is controlled by 10 pins. There should be at least a 2.8V volt output voltage for this switching regulator in order to make it work properly. Voltage regulator's maximal output current reaches 600mA A to meet the operation requirements. With a maximum output voltage of 5.5V, DC DC switching regulator has a very high efficiency. This DC-DC switching regulator operates from a supply voltage of 5.5V. Powered by a 50μA supply current, this DC-DC switching regulator operates on a DC-DC voltage.
ADP2503ACPZ-4.5-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 5.5V
ADP2503ACPZ-4.5-R7 Applications
There are a lot of Analog Devices Inc. ADP2503ACPZ-4.5-R7 Voltage Regulators applications.
- Computer-related products
- Flexible manufacturing cells
- Geothermal power
- Scientific research
- USB circuits
- Serial communication converter
- Motor controller circuits
- Emergency lighting monitoring equipment
- Correction machines
- Nuclear power plants