ADP2504ACPZ-2.8-R7
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad, CSP |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP2504 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 2.8V |
| Output Type | Fixed |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.3V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Output Configuration | Positive |
| Max Output Voltage | 5.5V |
| Topology | Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 2.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 2.8V |
| Height Seated (Max) | 0.85mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP2504ACPZ-2.8-R7 Overview
Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. During the development of this harley voltage regulator, 10 terminations were made. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 10-VFDFN Exposed Pad, CSP package. In this case, DC DC switching regulator has 1 outputs configured to it. On the output pins of this DC DC switching regulator, there is a Fixed output generated. The voltage regulator 12v fits the Surface Mount mounting hole. This voltage regulator 12v should operate at a temperature of -40°C~125°C TA when operating. A DC-DC switching regulator such as this one switches at 2.5MHz. Voltage regulators like this one can operate at least with 2.3V as the dc to dc voltage regulator's minimum input voltage. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. An input voltage of 3.6V is required to meet the requirements of the switching regulator operation. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. As part of the ADP2504 series of regulators, the voltage regulators can be found. At 2.8V volts, voltage regulator can provide voltage. During switching regulator operation, 10 pins are used. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 2.8V. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 1A A. A maximum voltage of 5.5V can be obtained from the regulator voltage. With a supply voltage of 5.5V, this harley voltage regulator works. This DC DC switching regulator operates from a supply current of 50μA.
ADP2504ACPZ-2.8-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 5.5V
ADP2504ACPZ-2.8-R7 Applications
There are a lot of Analog Devices Inc. ADP2504ACPZ-2.8-R7 Voltage Regulators applications.
- Access control systems
- Milling machines
- Packaging
- Alternators
- Computer application technology
- Arc suppression circuits
- Electrical power transmission
- Television equipment
- CNC system
- Remotely powered electric motors
