Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
10-VFDFN Exposed Pad, CSP |
Number of Pins |
10 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADP2504 |
Function |
Step-Up/Step-Down |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Voltage |
5.5V |
Output Type |
Adjustable |
Max Output Current |
1A |
Operating Supply Voltage |
5.5V |
Voltage - Input (Min) |
2.3V |
Input Voltage-Nom |
3.6V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
50μA |
Nominal Supply Current |
50μA |
Output Configuration |
Positive |
Max Output Voltage |
5.5V |
Topology |
Buck-Boost |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
2.5MHz |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
130ns |
Synchronous Rectifier |
Yes |
Fall Time (Typ) |
160 ns |
Min Output Voltage |
2.8V |
Max Duty Cycle |
30 % |
Height |
80μm |
Length |
3mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADP2504ACPZ-R7 Overview
optimized performance is achieved by utilizing the Tape & Reel (TR) package in this voltage regulator. As you can see, this harley voltage regulator contains 10 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. There is a 10-VFDFN Exposed Pad, CSP package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs configured on the voltage regulator. On its output pins, this adjusting voltage regulator generates Adjustable output. This switching regulator is designed to fit the Surface Mount mounting system. As long as its operating temperature is -40°C~125°C TA, dc to dc voltage regulator should perform well. In this voltage regulator 12v, the switching frequency is 2.5MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 2.3V. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 3.6V for the purposes of operation. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. This DC/DC regulator belongs to the ADP2504 family. There is a possibility that DC DC switching regulator can give voltage at 5.5V volts. During switching regulator operation, 10 pins are used. This voltage regulator 12v should be configured with an output voltage that is at least 2.8V. The maximum output current reaches 1A A to meet the switching regulator operation requirements. A maximum voltage of 5.5V can be obtained from the regulator voltage. Switching regulators operate at 5.5V supply voltages. It operates on a 50μA supply current of adjusting voltage regulator.
ADP2504ACPZ-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 5.5V
ADP2504ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADP2504ACPZ-R7 Voltage Regulators applications.
- Printing equipment
- Surge protection circuits
- Scientific research
- Wind power
- Gear/thread machining machines
- Sink circuits
- Medical equipment
- Electric heating, lighting
- Sensitive electronic devices
- Electric water heaters