ADP3120AJRZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.6V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADP3120A |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 5mA |
| Output Current | 1.5A |
| Propagation Delay | 70 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 70 ns |
| Rise Time | 20ns |
| Fall Time (Typ) | 11 ns |
| Rise / Fall Time (Typ) | 20ns 11ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.045 µs |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.07 µs |
| High Side Voltage - Max (Bootstrap) | 35V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
ADP3120AJRZ Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A packaging method of Tube is used.The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.6V~13.2V.A gate type of N-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -20°C~150°C TJ.Inverting, Non-Inverting is used as its input type.It's configured with 8 terminations.There are numerous related parts listed under its base part number ADP3120A.In this case, Surface Mount indicates how the device is to be mounted.The pins are configured with 8 when designing the chip.Mosfet driver is designed specifically to run on 12V volts of power.There is an output current limit of 1.5A for this device.There are various useful electronic components in its subcategory MOSFET Drivers.Components with 8 pins are available.There can be a voltage up to 35V on the high-side (Bootstrap).Mosfet driver supports an output current of 1.5A.As a rule of thumb, the operating supply voltage should be set to 12V.
ADP3120AJRZ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 35V
ADP3120AJRZ Applications
There are a lot of ON Semiconductor ADP3120AJRZ gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated Gate Driver Supplies
- High frequency line drivers
- Motor Controls
- Video amplifiers
- Line drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High-voltage isolated DC-DC converters
- Refrigerator
- Portable Navigation Devices
