ADP3121JCPZ-RL
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad, CSP |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Voltage - Supply | 4.15V~13.2V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADP3121 |
| Pin Count | 8 |
| Nominal Supply Current | 5mA |
| Output Current | 7A |
| Max Supply Current | 5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 32ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| High Side Voltage - Max (Bootstrap) | 35V |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ADP3121JCPZ-RL Overview
Its 8-VFDFN Exposed Pad, CSP package provides greater flexibility.A package of Tape & Reel (TR) has been used.2 drivers are incorporated for its configuration.Its recommended mounting way is Surface Mount.A supply voltage of 4.15V~13.2V demonstrates its superiority.The gate type on this device is N-Channel MOSFET.This device allows temperatures in the range of 0°C~150°C TJ.A type of Non-Inverting is used for input in this program.There are 8 terminations to form the base of its configuration.You will find various related parts under the base part number ADP3121.The device is mounted using Surface Mount.When designing, the device is configured with 8 pins.A supply voltage of 12V is required for operation.A board with 8 component pins is available.Max (Bootstrap) can be as high as 35V.Mosfet gate drivers supports a current output of 7A.In order to ensure greater stability, it is recommended to keep the supply current at 5mA.
ADP3121JCPZ-RL Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 35V
ADP3121JCPZ-RL Applications
There are a lot of ON Semiconductor ADP3121JCPZ-RL gate drivers applications.
- AC-DC Inverters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Telecom switch mode power supplies
- Dual-Battery Systems
- Portable Navigation Devices
- Uninterruptible Power Supplies (UPS)
- High-speed communications
- Commercial and agricultural vehicles (CAV)
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Gate Driver Supplies
