ADP3624ARDZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP3624 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 4A |
| Operating Supply Current | 1.2mA |
| Nominal Supply Current | 1.2mA |
| Output Current | 4A |
| Max Supply Current | 3mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 18V |
| Rise Time | 14ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP3624ARDZ-RL Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package.Tape & Reel (TR) represents the packaging method.This device is equipped with 2 drivers for its configuration.In this case, gate drivers is mounted along the way of Surface Mount.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.This device allows temperatures in the range of -40°C~150°C TJ.Non-Inverting is the input type used in this program.There are 8 terminations to form the base of its configuration.Mosfet driver contains a variety of related parts under Mosfet drivers base part number ADP3624.You mount it with Surface Mount.As a result, it is configured with 8 pins when it is designed.This device operates with 12V supply voltage.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 4A.This subcategory of MOSFET Drivers has a number of useful electronic components.The component has 8 pins.The device is capable of delivering a current of 4A.For higher stability, the supply current should be kept at 3mA.The device operates on a voltage of 1.2mA as the supply voltage.
ADP3624ARDZ-RL Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
ADP3624ARDZ-RL Applications
There are a lot of Analog Devices Inc. ADP3624ARDZ-RL gate drivers applications.
- Pulse transformer drivers
- Portable computers
- Solar power supplies
- Motor Control
- Power factor correction (PFC) circuits
- Telecom switch mode power supplies
- 3-Phase Motor Inverter Driver
- Industrial Motor Inverter - Power Tools, Robotics
- Commercial air-conditioning (CAC)
- Industrial motor drives - compact, standard, premium, servo drives
