ADP3631ARZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP3631 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Operating Supply Current | 1.2mA |
| Nominal Supply Current | 1.2mA |
| Output Current | 2A |
| Max Supply Current | 3mA |
| Propagation Delay | 35 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Min Input Voltage | 9.5V |
| Max Input Voltage | 18V |
| Rise Time | 14ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 30 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 35 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP3631ARZ-R7 Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is used.2 drivers are incorporated for its configuration.In this case, gate drivers is mounted along the way of Surface Mount.A supply voltage of 9.5V~18V demonstrates its superiority.There is a gate type of N-Channel MOSFET in this design.This device allows temperatures in the range of -40°C~150°C TJ.Input type of Inverting, Non-Inverting is used.As a result of its configuration, it contains a maximum of 8 terminations.Under its base part number ADP3631, various related parts can be found.Mosfet driver is mounted using Surface Mount.There are 8 pins available in the device.The device is specifically designed to operate at 12V volts.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.The maximum output current can amount to 2A.There are various useful electronic components in its subcategory MOSFET Drivers.On the board, there are 8 component pins.The output current can be set to 2A.If you want a stable supply current, you should keep it at 3mA.Powered by 1.2mA volts, it operates on a constant current.
ADP3631ARZ-R7 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
ADP3631ARZ-R7 Applications
There are a lot of Analog Devices Inc. ADP3631ARZ-R7 gate drivers applications.
- General Purpose 3-Phase Inverter
- Pulse transformer drivers
- Broadcast equipment
- Isolated switch mode power supplies (SMPS)
- Commercial and agricultural vehicles (CAV)
- Isolated Supplies for controller area network (CAN),
- Digitally controlled power supplies
- A/D drivers
- RGB applications
- Industrial motor drives - compact, standard, premium, servo drives
