ADP3633ARHZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP3633 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 4A |
| Operating Supply Current | 1.2mA |
| Nominal Supply Current | 1.2mA |
| Output Current | 4A |
| Max Supply Current | 3mA |
| Propagation Delay | 35 ns |
| Input Type | Inverting |
| Min Input Voltage | 9.5V |
| Max Input Voltage | 18V |
| Rise Time | 14ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP3633ARHZ-RL Overview
Its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package is adopted for higher flexibility.A packaging method of Tape & Reel (TR) is indicated.Gate drivers is configured wGate driversh 2 drivers.There is a mounting bracket in the way of Surface Mount.A supply voltage of 9.5V~18V demonstrates its superiority.Gate type N-Channel MOSFET has been used in its design.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver accepts input of type Inverting.As a result of its configuration, it contains a maximum of 8 terminations.There are various parts that can be found under its base part number ADP3633.Mosfet driver is mounted using the Surface Mount method.When designing, the device is configured with 8 pins.This device operates with 12V supply voltage.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 4A can be achieved at maximum power.There are various useful electronic components in its subcategory MOSFET Drivers.The board contains 8 pins for component connections.The output current of this device can be set to 4A.Mosfet gate drivers is recommended to keep the supply current at 3mA to ensure greater stabilMosfet gate driversy.The power supply voltage for this device is set to 1.2mA.
ADP3633ARHZ-RL Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
ADP3633ARHZ-RL Applications
There are a lot of Analog Devices Inc. ADP3633ARHZ-RL gate drivers applications.
- Head-up and Head mounted displays
- Isolated Supplies for Motor Control
- PCMCIA applications
- Line drivers
- High frequency line drivers
- Commercial and agricultural vehicles (CAV)
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated Gate Driver Supplies
- Telecom switch mode power supplies
- Industrial motor drives - compact, standard, premium, servo drives
